Managing Destinations - Navigon 7110 User Manual

User's manual NAVIGON 7100 | 7110
Route Profile
A so called route profile forms the basis of the route calculation.
Tap the Route Profile button if you want to view or change the route
profile.
Note: If you change the route options, these remain valid for
subsequent navigation.
Information about how to change individual route profile settings can be
obtained by tapping on the corresponding
Turn-by-Turn List
If you would like to see detailed directions for the route, tap on Options
> Show Turn-by-Turn List.
For detailed information about the functions in the T
window, please refer to chapter "Turn-by-Turn List" on page 43.
Starting navigation
Tap the Start Navigation button or simply start driving.
►
No GPS reception
If the received GPS signal is insufficient, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
Wait until GPS reception is sufficient for determining position, the
►
route will be recalculated and you can begin navigation.
Tap the Cancel button. The M
►
is saved in the L
Tap the Demo button. The route will be calculated using the centre
►
of the specified location as starting point. Subsequently, navigation
of the route will be simulated.
Tap
6

Managing Destinations

Every destination that you enter, and the destinations from the L
D
ESTINATIONS
sense if you frequently navigate to a particular destination.
- 28 -
D
AST ESTINATIONS
(Back) to end the demonstration.
list may be saved to the F
(Help) button.
URN
W opens. Your destination
AIN INDOW
list.
list. This makes
AVOURITES
- -T L
BY URN IST
AST
Managing Destinations