Table of Contents
Advertisement
Section 4
Switches
Each electrical circuit on your boat is equipped with a control
switch. The switches have an indicator light for easy ON/OFF
identification. All switches are circuit breaker protected.
Refer to Standard Dash Pod in this section for additional
information on switch operation.
Port, Starboard Ballast, 216 Only
These buttons fill and drain the ballast tank designated to the
switch. Ballast tanks are an option on most Correct Craft boats. A
full description of how these buttons function is discussed in
Section 4, Ballast Tank Control Switches.
12V
12-Volt
This 12-Volt button controls an accessory which has been added to
your boat or provides a circuit to add an accessory. The indicator
light will illuminate when the switch is in the ON position. Limit the
accessory to 10 amps.
Heater Fan (if equipped)
The heater button controls four different heater functions.
Pressing and releasing the "heater" button turns on Low Speed.
Press again for Medium Speed.
Press again for High Speed.
Press again for Off.
The indicator light for this button will illuminate if the heater is
running at any of the three speeds.
4-30
Correct Craft, Inc.
Advertisement
Table of Contents
