On Consignment Of The Machine; Introductory Comment; Technical Data - COMAC OMNIA 26 Manual

On consignment of the machine

On consignment of the machine On consignment of the machine On consignment of the machine
When the machine is consigned to the customer, an immediate
check must be performed to ensure all the material mentioned
in the shipping documents have been received and moreover to
find out that the machine has not suffered damage during
transportation. If damage has occurred, get the shipping agent
to verify immediately the amount and nature of the damage
suffered and at the same time inform our claim department. It is
only by prompt action of this type that compensation for
damage may be successfully claimed.

Introductory comment

Introductory comment Introductory comment Introductory comment
This is a floor cleaning machine which, using the mechanic
abrasive action of two rotary brushes and the chemical action of
a solution water-detergent, is able to clean any type of floor,
picking up during its advance movement, the removed dirt and
the detergent solution which has not been absorbed from the
floor.
The machine must be used only for such purpose. We would The machine must be used only for such purpose. The machine must be used only for such purpose. The machine must be used only for such purpose.
impress upon you that any machine will function efficiently and
operate successfully, only if used correctly and maintained in
fully efficient working order. We therefore suggest you to read
this instruction booklet carefully and re-read it whenever
difficulties arise in the course of machine use. Our Service
Department is at your disposal for all such advice and servicing
as may prove necessary .

TECHNICAL DATA

TECHNICAL DATA
TECHNICAL DATA TECHNICAL DATA
Cleaning width
Squeegee width
Working capacity, up to
Brushes
Brushes rpm
Max. brushes pressure
Max. specific pressure on the brushes
Tension brushes motor
Power brushes motor
Tension traction motor
Power traction motor
Type of drive
Movement speed
Max gradient
Tension suction motor
Power suction motor
Suction vacuum
Capacity solution tank
Capacity recovery tank
Machine length
Machine height
Machine width (without squeegee)
Battery compartment
Batteries
Batteries weight
Machine weight (empty and without batteries)
Acoustic radiation pressure level (in conformity with IEC 704/1)
Vibration level
28
U.M. U.M.
U.M. U.M. OMNIA26 OMNIA26 OMNIA26 OMNIA26 OMNIA32 OMNIA32 OMNIA32 OMNIA32
mm 660 830
mm 1015 1115
sqm/h
2640 3320
∅ mm
(2) 345 (2) 430
rpm
220 210
kg 80 80
g/sqcm
61 36
V
36 36
W
1250 1250
V 36 36
W 300 450
aut. aut.
km/h
0÷4 0÷4
10% 10%
V 36 36
W
670 670
mbar
190 190
l
75 105
l 85 115
mm 1600 1650
mm
1120 1120
mm
700 850
mm 436x614xH510
V/Ah 36/270 36/270
kg
315 315
kg
205 240
dB (A)
<70 <70
m/sqs 1.72 1.72
OMNIA42 OMNIA42 OMNIA42 OMNIA42
1040
1315
4160
(2) 533
170
80
29
36
1500
36
450
aut.
0÷4
10%
36
670
190
105
115
1750
1120
760
36/270
315
290
<70
1.72