National Instruments Measure Data Acquisition User Manual page 73

This appendix describes solutions to problems that you might
encounter using the Measure DAQ Add-In.
Problem:
Solution:
Problem:
Solution:
No DAQ menu appears.
From the Tools»Add-Ins. Click on the
Browse button and look for DAQ.XLA in
the directory where you installed Measure.
Once you find it, select it and click on the
OK button. If a dialog box appears with the
message Replace existing
'DAQ.XLA'? click on the Yes button. You
will see a Measure Data Acquisition Add-In
entry in the list box and the checkbox next
to it will be checked. Click on the OK
button.
The list of data acquisition devices is empty.
Verify with the NI-DAQ Configuration
Utility (WDAQCONF.EXE) that you have
properly installed and configured your
device. Verify that your device is supported
by Measure. Refer to Appendix B, DAQ
Hardware Capabilities.