National Instruments Measure Data Acquisition User Manual page 65

slaveClkErr
-10616
noClkSrcErr
-10617
badClkSrcErr
-10618
multClkSrcErr
-10619
noTrigErr
-10620
badTrigErr
-10621
preTrigErr
-10622
postTrigErr
-10623
delayTrigErr
-10624
masterTrigErr
-10625
slaveTrigErr
-10626
noTrigDrvErr
-10627
multTrigDrvErr
-10628
invalidOpModeErr
-10629
invalidReadErr
-10630
noInfiniteModeErr
-10631
The clock configuration for the clock
slave is invalid.
No source signal has been assigned to the
clock resource.
The specified source signal cannot be
assigned to the clock resource.
A source signal has already been
assigned to the clock resource.
No trigger signal has been assigned to
the trigger resource.
The specified trigger signal cannot be
assigned to the trigger resource.
The pretrigger mode is not supported or
is not available in the current
configuration, or no pretrigger source
has been assigned.
No posttrigger source has been assigned.
The delayed trigger mode is not
supported or is not available in the
current configuration, or no delay source
has been assigned.
The trigger configuration for the trigger
master is invalid.
The trigger configuration for the trigger
slave is invalid.
No signal has been assigned to the
trigger resource.
A signal has already been assigned to the
trigger resource.
The specified operating mode is invalid,
or the resources have not been
configured for the specified operating
mode.
An attempt was made to read 0-bytes
from the transfer buffer, or an attempt
was made to read past the end of the
transfer buffer.
Continuous input or output transfers are
not allowed in the current operating
mode.