Programming; Learn Remote Or Sensors Or Control Panel - SkyLink SA-001S User Instructions

Hide thumbs Also See for SA-001S:

Table of Contents

Insert the rechargeable battery pack

to the black connector marked "NiMH"

cAuTION:

The adaptor as a disconnect devices: − the socket-outlet shall be installed near the

equipment and shall be easily accessible.

In order for the remote or sensor or control panel to communicate with the Exter-

nal Wireless Alarm properly, this need be programmed into the Wireless External

Alarm previously. Follow the brief instructions below to program it to the Wireless

External Alarm.

Before proceeding, ensure you have both the Wireless External Alarm and the re-

mote or sensor or control panel next to you.

3A – Learn remote to the Wireless External Alarm:

- Press and hold the Learn button on the Wireless External Alarm for 2

seconds and then release. The Learn/Set LED will flash.

- Activate the remote by pressing any one of the buttons.

- You will hear 2 beeps and the LEDs will flash twice indicating the remote is now

programmed to the Wireless External Alarm.

PrOgrAmmINg –

Plug in AC

Plug in AC adapter

adapter

Table of Contents