Subscribe to Our Youtube Channel
Related Manuals for SkyLink TOTAL PROTECTION ALARM SYSTEM SC-10
Summary of Contents for SkyLink TOTAL PROTECTION ALARM SYSTEM SC-10
- Page 1 www.skylinkhome.com Total Protection Alarm System MODEL: SC-10 CUSTOMER SERVICE 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Tel : (800) 304-1187 Fax : (800) 286-1320 AUG, 2005. 101A073-001 Email : support@skylinkhome.com PAT. 6243000B1...
-
Page 2: Additional Accessories
SKYLINK TECHNOLOGIES INC. Your Guide to the Total Protection Alarm System MODEL: SC-10 – – ADDITIONAL ACCESSORIES Smoke Sensor (SS-433) - Detects sound frequencies of existing smoke, carbon monoxide alarms - Activates Security Control Panel (SC-001) or Emergency Dialer (AD-433S) when the preset... -
Page 3: Table Of Contents
ADDITIONAL ACCESSORIES Security Control Panel (SC-001) - Four alarm modes (Day, Night, Away, Chime) - Four zones, each zone controls up to 6 devices - Reliable design with microcontroller - 110dB siren Silent Alarm (SW-433) - Plugs into any AC outlet, then plug light into Silent Alarm unit - Light flashes when sensor(s)/transmitter(s) is (are) activated... -
Page 4: Package Contents
PACKAGE CONTENTS All materials required for installation are included in this package: One Audio Alarm (AA-433) - includes 1 antenna (installed) 1 AC adapter 1 9 volt alkaline battery Two sets of Door/Window Sensors (WT-433) each set includes: 1 transmitter 1 magnetic switch (attached to the transmitter) 1 magnet... -
Page 5: Overview
– Congratulations. You have just purchased one of the most reliable and up- to-date Wireless Security Systems on the market today. Skylink’s innovative rolling code technology provides increased security and trouble free wireless connections. It guarantees that the Audio Alarm will only recognize radio waves from it’s remote sensors, (Door/Window Sensors and the Keychain... -
Page 6: Planning Your Home Security Needs
PLANNING YOUR HOME SECURITY NEEDS Before you begin to install your Security System, analyze the premises to determine your security needs. If your premises has two entrances, you may want to put a Door/Window Sensor on each door. You may choose your main door and a window that is hidden by some bushes and is not visable from the street. -
Page 7: Installation
DELETE SENSORS AND TRANSMITTERS You can not delete one sensor/transmitter from the Audio Alarm at a time. You must clear all the sensors and transmitters that are currnetly com- municating with the Audio Alarm, then re-program the ones you want to keep. Delete All Sensors and Transmitters 1. - Page 8 INSTALLATION Screwing the unit to the wall 1. Unscrew the two triangular hanging tabs located at the back of the Audio Alarm. 2. Turn them around and slide them back into place so that the two tabs are pointing up and the two keyholes are visible from the front.
-
Page 9: Keychain Transmitter
ACTIVATE AND DEACTIVATE THE SYSTEM Now that the system is installed and the sensors are communicating with the Audio Alarm, it is time to learn how to arm and disarm the Audio Alarm. The only way to arm and disarm the Audio Alarm is via the Keychain Trans- mitter and Keypad Control (option). -
Page 10: Testing Your System
TESTING YOUR SYSTEM Before you learn how to use your security system, test to make sure that the Door/Window Sensors and the Keychain Transmitter are communicat- ing with the Audio Alarm. TESTING THE DOOR/WINDOW SENSORS Turn on the Audio Alarm, (slide the button on the bottom of the unit to “ON”), allow 30 seconds for the Audio Alarm to warm up.
Need help?
Do you have a question about the TOTAL PROTECTION ALARM SYSTEM SC-10 and is the answer not in the manual?
Questions and answers