SkyLink SK-200 Quick Manual

Quick Guide
Alarm System Starter Kit
Protect your Home the Smart Way!
Model: SK-200
iPhone not included.
4. Download the SkylinkNet App
1. Tap on App Store 2. Tap on Search Icon and 3. Tap on Free Button
search for "Skylinknet" to download the App.
NOTE: Only the "SkylinkNet" App will work with
the Internet Hub.
4. When download is completed,
it will show on your HomeScreen.
1. What's Included
NOTE: 6 x AAA- and 1 x AA-Batteries required to setup the SkylinkNet Alarm System.
Internet Hub Motion Sensor 2 x Window/Door Sensor
Keychain Remote Power Adapter Ethernet Cable
5. Create & Activate the Hub
1. Open the SkylinkNet App 2. Enter your information 3. Check your email to activate
and tap on "Create Account". and tap on "Sign Up". your account and tap on "Continue"
to log in.
.
4. Click on the link from the email to activate your account. 5. Now you are ready to
login to your account.
2. Setup the Hub
1. Connect your Hub to an available Port on your Internet Router using the Ethernet cable.
2. When finished press Continue.
3. Insert 4 x AAA-Batteries in the Hub for backup power in case of power outage. (Optional)
Mounitng
Accessories
6. Setup the Hub
2. Tap on "Initialize a
1. Tap on "Set up Hub >".
new Hub >".
4. Enter your information 5. Follow the instruction on
screen to reset the Internet
and tap on "Continue".
Hub and tap "Continue".
3. Insert Batteries for Sensors
1. Push the both side in and open the cover of the Window/Door Sensor and insert a AAA-Battery.
1. Pull the "Tag Isolator" or use a coin to open the Motion Sensor and insert a AA-Battery.
7. Add Sensors and Keychain Remote
1. Go to "More" and tap 2. Tap on "Setup Wizard".
3. Follow the instruction on screen
on "System Settings".
to connect the Internet Hub.
6. Name your sensor and
6. Hub is added and you will 5. Select the type of
see a green or red dot indicating location and tap "Continue".
sensor you want to add.
if it's connected to the Hub.
3. Tap on "Add Device". 4. Tap on "Sensors" or
"Security Remote".
(If you select Security Remote, skip to Step 6)
8. Now trigger the sensors
to test if the SkylinkNet App
is showing the sensor status
correctly.
NOTE: If motion is detected, a red
led light inside the sensor will flash.
Sensor will not be triggered by new
7. Tap the "Learn Now"
motion unless no motion has been
button and follow the video
detached for 15 seconds.
to activate the sensor.