SkyLink SK-250 User Manual

User Manual
Alarm System Starter Kit
Protect your Home the Smart Way!
Model: SK-250
iPhone not included
P/N: 101Y269-001 ©2017 SKYLINK GROUP.

4. Download the SkylinkNet App

1. Tap on App Store 2. Tap on Search Icon and 3. Tap on Free Button
search for "SkylinkNet." to download the App.
NOTE: Only the "SkylinkNet" App will work with
the Internet Hub.
4. When download is completed,
it will show on your HomeScreen.

1. Package Contents

NOTE: 6 x AAA- and 1 x AA-Batteries required to setup the SkylinkNet Alarm System.
1x Internet Hub 2x Motion 2x Door/Window 1x Keychain
Sensors Sensors
1x Indoor Wireless 2x Power 1x Ethernet
Pan & Tilt Camera Adapters Cable

5. Create a SkylinkNet Account

1. Open the SkylinkNet App 2. Enter your information 3. Check your email to activate
and tap on "Create Account." and tap on "Sign Up." your account and tap on
"Continue" to log in.
4. Click on the link from the email to activate your account. 5. Now you are ready to
login to your account.

2. Install the Internet Hub

1. Connect your Hub to an available Port on your Internet Router using the Ethernet cable.
2. Plug in the Power Adapter.
Remote
3. Insert 4 x AAA-Batteries in the Hub for backup power in case of power outage. (Optional)
Mounting
Accessories

6. Set up the Internet Hub

1. Tap on "Set up Hub." 2. Tap on "Initialize a
new Hub."
4. Enter your information 5. Follow the instruction on
and tap on "Continue." screen to reset the Internet
Hub and tap "Continue."

3. Insert Batteries for Sensors

1. Slightly push both sides of the Door/Window Sensor and pull out the cover to insert an AAA-Battery.
2. Use a coin to open the Motion Sensor and insert an AA-Battery.

7. Add Sensors and Keychain Remote

3. Follow the instruction on 1. Go to "More" and tap 2. Tap on "Setup Wizard."
screen to connect the
on "System Settings."
Internet Hub.
6. Hub is added and you will see
5. Select the type of 6. Name your sensor and
a green or red dot indicating if location and tap "Continue."
sensor you want to add.
it's connected to the Hub.
4. Tap on "Sensors" or
3. Tap on "Add Device."
"Security Remote."
(If you select Security Remote, skip to Step 6)
8. Now trigger the sensors
to test if the SkylinkNet App
is showing the sensor status
correctly.
NOTE: If motion is detected, a red
LED light inside the sensor will flash.
Sensor will not be triggered by new
7. Tap the "Learn Now"
motion unless no motion has been
button and follow the video
detached for 15 seconds.
to activate the sensor.