Advertisement
Quick Links
Wireless External Alarm
1. Introduction
Congratulations on purchasing the Skylink Wireless External Alarm SA-001 Series. The SA-001
Series provide you with a piercing siren and powerful features yet ease to use. You will find the
installation to be simple and be able to get the unit up and running easily.
The following items are included in this package:
-
One Wireless External Alarm
-
AC adapter
-
Battery (Optional)
-
User's Instructions
2. Power Up
-
Remove the cover of the Wireless External Alarm as shown.
-
Insert 3 AA batteries or rechargeable batteries (not included) to the unit, its Learn/Set
LED will turn on for 1 second and then off. The PWR LED will keep flashing.
-
Plug in the AC adapter to an AC outlet and the other end into the "DC 12V" jack on the
Wireless External Alarm. The PWR LED indication will stay on steadily.
Model: SA-001A/SA-001S
Preliminary Manual
Advertisement
Related Manuals for SkyLink SA-001
Summary of Contents for SkyLink SA-001
- Page 1 Preliminary Manual 1. Introduction Congratulations on purchasing the Skylink Wireless External Alarm SA-001 Series. The SA-001 Series provide you with a piercing siren and powerful features yet ease to use. You will find the installation to be simple and be able to get the unit up and running easily.
- Page 2 3. Setup – Learn remote or sensors or control panel In order for the remote or sensor or control panel to communicate with the Wireless External Alarm properly, the remote or sensor or control panel must be programmed to the Wireless External Alarm.
- Page 3 3C – Learn door/window sensor to the Wireless External Alarm: Press and hold the Learn button on the Wireless External Alarm for 2 seconds and then release. The Learn/Set LED will flash. Activate the remote by separating the magnet from the sensor unit. You will hear 2 beeps and the LEDs will flash twice indicating the sensor is now programmed to the Wireless External Alarm.
- Page 4 While holding the Learn/Set button on the Wireless External Alarm until all the LEDs turn off. You may release the Learn/Set button when the Learn/Set LED stay on. Press and hold the Learn/Set button on the Wireless External Alarm for 2 seconds until it emits 2 beeps and all the LEDs flash twice.
- Page 5 6A – Arm Home Sequence: This setting is used when you wish to secure the area but will be at home and moving around within the armed area. In Arm Home setting, any motion sensor will not respond to any movement.
- Page 6 7. Operating the Skylink Security Control Panel The Wireless External Alarm is designed to work with the Skylink security control panel such as AM-001, ML-001 and SC-001. Put the control panel that you plan to program into programming mode.
- Page 7 Installation (Only applicable to SA-001S) The Wireless External Alarm model SA-001S built-in with a Solar Panel, this solar panel is mounted on the top of the housing to maintain a charge to the rechargeable batteries during the daylight interval. During darkness, an insignificant amount of energy is released from the rechargeable battery to operate the Wireless External Alarm.
- Page 8 Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
-
Page 9: Warranty
- find out the up-to-date specifications - know more about features and applications - download documents, i.e. user’s instructions - order Skylink products or if you have difficulty getting products to work, please: 1. visit our FAQ section at www.skylinkhome.com, or 2.