Connect The Wireless External Alarm With Your Existing Alarm System - SkyLink SA-001S User Instructions

Hide thumbs Also See for SA-001S:

Table of Contents

cONNEcT ThE WIrELEss ExTErNAL ALArm WITh

You may connect your existing alarm system with the Wireless External Alarm so

that the Wireless External Alarm will be triggered by your alarm system. There are

2 ways you can connect your Wireless External Alarm with your existing alarm

system. The input terminals (INPUT1 or INPUT2) can be a Normally Open (NO)

momentary dry contact or the DC voltage of 12V.

8A – Connect your existing alarm system to the INPUT1, this provides the

delay trigger until the Wireless External Alarm is armed.

8B – Connect your existing alarm system to the INPUT2, this provides the

instant alarm.

yOur ExIsTINg ALArm sysTEm

Learn/ Set

Table of Contents