MH RYZ 50 Cross Service Manual page 51

DISMANTLING THE GEARBOX AND THE
SELECTION SYSTEM
1) Position the selector drum to guide the Mecanindus pin against
the secondary drive shaft selector fork shaft. .
2) Remove the selection shaft (1) fi tted with its two friction was-
hers.
3) Remove the secondary drive shaft selector forks shaft (2).
4) Remove the top selector fork (3) from the secondary drive
shaft.
5) Turn the selector drum (4) to lower the selector fork (5) on the
primary drive shaft in the bottom slot of the drum.
6) Remove the selector drum.
7) Remove the second selector fork (6) from the secondary drive
shaft.
RYZ
ENGINE 5-13
5