Removing The Clutch Cover; Removing The Clutch - MH RYZ 50 Cross Service Manual

RYZ
5-8 ENGINE
5

REMOVING THE CLUTCH COVER

Remove the kick-start lever securing bolt (where fi tted).
1)
Apply the kick-start lever slightly and hold it in position.
2)
Loosen the stop (1) on the starter shaft and release the kick-
3)
start lever to slacken the spring.
Remove the kick-start lever.
4)
N.B.:
Prepare a container to hold the oil from the gearbox.
Remove the bolt (2) to drain the gearbox.
5)
Remove the eight cover securing bolts.
6)
Remove the cover.
7)
Remove the two centring pivots and the paper gasket.
8)

REMOVING THE CLUTCH

Remove the four bolts and springs (1) from the pressure plate (2).
1)
Remove the pressure plate.
2)