RYZ
4-10 CHASSIS
4
SHOCK ABSORBER
REMOVAL
CAUTION:
Stand the machine on blocks under the chassis to ensure
that the rear wheel is off the ground.
1)
Remove the seat – see "Removing the seat" in this section.
Remove the nut, the washer and the bottom securing shaft
2)
from the shock absorber (1).
3)
Remove the nut, the washer and the top securing shaft from
the shock absorber (2).
Remove the shock absorber from the right-hand side of the
4)
machine by pulling it downwards.
AIR FILTER
REMOVING THE AIR FILTER SPONGE
Remove the left-hand side cover.
1)
Remove the air fi lter cover (four screws) and its seal.
2)
CAUTION:
The grilles are of a different size. Be sure to reposition
them correctly on refi tting.
Remove the sponge (1) and the two grilles (2).
3)