MH RYZ 50 Cross Service Manual page 47

3) Remove the assembly (3) consisting of four friction disks and
three smooth disks.
4) Remove the primary shaft: the pusher (4), the ball (5) and the
push rod (6).
5) Remove the clutch control lever (7) with its spring (8) and its
washer (9).
6) Fold back the clutch nut (10) tab washer (11).
7) Immobilise the clutch dog (12) with the clutch immobilisation
tool.
Special tool (C)
8) Remove the nut and the washer.
9) Remove the clutch dog (12), the grooved spacer (13), the hood
(14), the fl at washer (15) and the tapered washer (16).
RYZ
ENGINE 5-9
5