Sanitizing Procedure - Manitowoc Indigo Series Technician's Handbook

Step 7 Use 1/2 of the cleaner/water mixture to clean
all components. The cleaner solution will foam when
it contacts lime scale and mineral deposits; once the
foaming stops use a soft-bristle nylon brush, sponge or
cloth (NOT a wire brush) to carefully clean the parts. Soak
parts for 5 minutes (15 - 20 minutes for heavily scaled
parts). Rinse all components with clean water.
Step 8 While components are soaking, use 1/2 of the
cleaner/water solution to clean all food zone surfaces of
the ice machine and bin (or dispenser). Use a nylon brush
or cloth to thoroughly clean the following ice machine
areas:
• Side walls
• Base (area above water trough)
• Evaporator plastic parts - including top, bottom, and
sides
• Bin or dispenser
Rinse all areas thoroughly with clean water.

SANITIZING PROCEDURE

Step 9 Mix a solution of sanitizer and lukewarm water.
Solution
Type
Sanitizer
Step 10 Use 1/2 of the sanitizer/water solution to
sanitize all removed components. Use a spray bottle to
liberally apply the solution to all surfaces of the removed
parts or soak the removed parts in the sanitizer/water
solution. Do not rinse parts after sanitizing.
Part Number STH026 6/15
Water
3 gal. (12 L)
Mixed With
2 oz (60 ml) sanitizer
45