Assembly Of The 60L Hard Catcher; Attaching The 60L Hard Catcher - ALDI 49291 User Manual

Understanding and using these operating instructions
3. Using the other cable holder clip (13) supplied,
again secure the motor throttle cable (6) to the
lower handle (9) to ensure it is secure. (Fig H)

Assembly of the 60L Hard Catcher

The 60L hard catcher (14) is supplied in 2 sections.
Locate the top half of the catcher on top of the
bottom half and interlock them together by
aligning the 3 tabs on each side of the catcher and
the 3 tabs at the rear, into the matching slots on
the base of the upper half of the 60L hard catcher
(14). When correctly aligned, they will click into
place. (Fig I)

Attaching the 60L Hard Catcher

1. Lift the rear discharge guard (16) in order to
position the assembled 60L hard catcher (14).
NOTE: Do NOT ever start the lawn mower if the
rear discharge guard does not fully return to the
close position if the catcher is not fitted.
2. With the rear discharge guard (16) raised, align
the 2 hooks (one on each side) onto the rear
discharge chute with the 2 tabs (one on each
side) on the 60L hard catcher (14).
3. When these are aligned, push the 60L hard
catcher (14) in a downwards direction to secure
the tabs onto the hooks (Fig J)
4. Release the rear discharge guard (16) to secure
the 60L hard catcher (14) into place. (Fig K)
NOTE: Always empty the catcher before it has
reached maximum capacity, otherwise it will
decrease the performance of the lawn mower.
TIP: Do not leave grass clippings in the catcher
for extended periods of time.
16
e-mail: help@powertoolsupport.com
MODEL: №. 49291 • 08/2015 • 49291
190cc 4 Stroke Petrol Lawn Mower
H.
I.
J.
K.
AFTER SALES SUPPORT
1800 909 909
(toll free)