139cc 4 Stroke Petrol Lawn Mower
4. After securing the lower handles in to position, extend the upper handle
bar into the upright position, (Fig D) and then simply secure the upper
handle locking knobs (5) that are already loosely in position. (Fig E)
5. Check the on/off switch cable (3) is correctly routed and secured with the
supplied clip (29). (Fig F)
WARNING. When opening up the upper handle bar take care NOT
to pinch the switch cable in the hinging of the handle bars and
ensure the cable is not trapped within the bars being clamped.
D.
Assembly of the 45L Hard Catcher
WARNING. Ensure the motor is off and
not operating when undertaking this task.
1. The 45L hard catcher (7) is supplied in two
sections. Locate the top half on top of the
bottom half and interlock them together by
aligning the lugs and slots, and pushing the
halves together until they click into place. (Fig G)
AFTER SALES SUPPORT
1800 909 909
(toll free)
E.
LOOSEN
TIGHTEN
F.
G.
e-mail: help@powertoolsupport.com
MODEL: №. 50620 • 11/2015 • 50620
Assembly
15