Table of Contents
Advertisement
Understanding and using these operating instructions
Maintenance
Replacing the Blades
Note. Before making any adjustment or
maintenance procedures to the lawn mower ensure
it is turned off and the spark plug lead is removed.
Note. Wear heavy gloves to protect your hands.
1. With the engine switched off, remove the 60L
hard catcher (14) and lift the front of the lawn
mower upwards so the upper handles (1) sit on
the ground and the spark plug faces upwards.
2. Remove the blade bolt (31) using a 17mm spanner (not supplied) by
turning in an anti-clockwise direction (Fig AG), then remove the outer
flange (32) (Fig AH). This allows you to be able to remove the blade
mounting plate (37) from the lawn mower.
3. To remove a single blade from the blade mounting plate (37), again use
a 17mm spanner (not supplied) to loosen and remove the nut, screw and
washers. (Fig AI/AJ)
AH.
NOTE: There is 1 washer located under the screw
on the outer side of the blade mounting plate (37),
and one on the underside of the blade mounting
plate in between the blade and blade mounting
plate (37). Be careful not to lose these.
4. Repeat the process to remove the other
3 blades.
5. Clean the dirt and grass from around the
blade mounting area.
26
e-mail: help@powertoolsupport.com
MODEL: №. 49291 • 08/2015 • 49291
AI.
190cc 4 Stroke Petrol Lawn Mower
AG.
AJ.
AK.
AFTER SALES SUPPORT
1800 909 909
(toll free)
Hide quick links:
Advertisement
Table of Contents
