Attaching The Upper Handles - ALDI 49291 User Manual

190cc 4 Stroke Petrol Lawn Mower
4. Once you have decided the positioning of the
handles to suit your mowing height, locate the
square hole up from the bottom of the lower
handles (9), and position so they match the
square notch on the lower handle mounting
plates (12). (Fig D)
5. Insert the screw through the lower handle
square hole, then through the mounting plate
(12), and secure into position by then screwing
on the lower handle locking knob (11) onto the
screw on the external side of the lower handle
mounting plate (12). (Fig E)
6. Secure the lower handle locking knob (11)
until finger tight.
7. Repeat on the opposite side ensuring both of
the handle locking knobs are firm and secure.

Attaching the Upper Handles

With the lower handles now in position, the upper
handles and bar (1) can now be secured
in position.
IMPORTANT: Ensure the cables do not get caught
around the handle levers or do NOT get bent
around the clamping mechanism.
1. When the upper handles (1) are in line with
the lower handles (9) secure them in position
by pulling the upper handle locking lever (10)
towards the upper handle bar (1) and locking
the handle in position (repeat other side). (Fig F)
NOTE: Tension on the upper handle locking
levers can be adjusted by rotating the lever
knob.
2. Secure the self propel variable speed cable (4) to
the lower handle (9) using one of the supplied
cable holder clips (13) (qty 2). (Fig G)
AFTER SALES SUPPORT
1800 909 909
(toll free)
Operating instructions and safety notes!
D.
E.
F.
G.
e-mail: help@powertoolsupport.com
MODEL: №. 49291 • 08/2015 • 49291
15