Connect And Disconnect The Appliance; Water Temperature Setting; Operation - Bosch Therm 6000 S Installation And Operating Instructions Manual

Open water valve.
Check for water leaks at all joints.

4.3 Connect and disconnect the appliance

Connect
To start the appliance press the On/O button.
Fig. 12
Disconnect
To shut down the appliance pr

4.4 Water temperature setting

The temperature value indicated on the
LCD panel corresponds to the water
temperature at the appliance outlet.
To regulate the emitted water temperature:
Press the or
obtained.
Fig. 13
Therm 6000S
ess the On/O button again.
until the desired value is
Once the desired temperature is set, open the hot water tap.
These appliance has an electronically
controlled gas valve that modulates the
burner input in response to both varying hot
water ow rates and/or changes in any
incoming and outgoing water
temperatures.

4.5 Operation

Turn ON the main swicth and the appliance is ready to work.
When a hot water tap is opened, main burner ignites and
LCD displays indication
Fig. 14
LCD ashes until selected temperature is
reached.
Operating instructions | 11
.
6720608920-35.1AL
6 720 800 095 (2014/05)