Connect And Disconnect The Appliance; Water Temperature Setting; Operation; Registration Of Remote Control (Accessory Nº 7 709 003 756) - Bosch Therm 8000 S GWHC 27 CTDE Installation And Operating Instructions Manual

B Open water valve.
Check for water leaks at all joints.

4.3 Connect and disconnect the appliance

Connect
B To start the appliance press the On/O button.
Fig. 12
Disconnect
B To shut down the appliance press the On/O button again.

4.4 Water temperature setting

The temperature value indicated on the LCD
panel corresponds to the water temperature
at the appliance outlet.
To regulate the emitted water temperature:
B Press the or until the desired value is obtained.
Fig. 13
Therm 8000 S
Operating instructions | 11
B Once the desired temperature is
These appliance has an electronically
controlled gas valve that modulates the
burner input in response to both varying hot
water ow rates and/or changes in any
incoming and outgoing water temperatures.

4.5 Operation

Turn ON the main swicth and the appliance is ready to work.
B When a hot water tap is opened, main burner ignites and
LCD displays indication
Fig. 14
LCD ashes until selected temperature is
reached.
4.6 Registration of remote control (accessory nº 7
709 003 756)
Only a quali ed technician is a llowed to install the aditional
PCB that is supplied with the remo
PCB the registration can be made.
The registration of the remote control must be done near the
appliance.
Hot water tap closed.
Turn OFF the appliance (Fig. 4 , pos.1).
B Press and hold the programming key (Fig. 4 , pos.3), press
ON/OFF button(Fig. 4 , pos. 1) to connect the appliance.
Release programming key only when LCD displays "188"
The LCD displays the signal "P2".
B Press key , until it displays the signal "P3".
B Press programming key again for about 1 second.
LCD panel displays one number and one rotating digit.
The number represents the remote control which is to be
registered, the rst remote control will be registered with
number "0", the second with number "1" and so on.
set, open the hot water tap.
.
6720608920-35.1AL
te. Only after installation of
6 720 680 174 (2012/09)