Technical Characteristics And Dimensions; Intended Use; Appliance Description; Anticorrosion Protection - Bosch Tronic 2000T User And Installation Manual

2 Technical Characteristics and
dimensions
2.1

Intended use

The appliance was designed to heat and store DHW. Comply
with all regulations and standards related to drinking water
applicable in the country.
Use the appliance only in closed systems.
Only use adequate solar liquid in the heat exchanger coil (if
present).
Using the appliance for any other purpose will be considered
incorrect use. Bosch accepts no liability for any damage
resulting from such use.
Water characteristics
Water hardness, min.
pH, min. – max.
Conductivity, min. – max.
Table 2 Water characteristics
2.2

Appliance Description

• Steel-glassed tank in conformity with the European
regulations
• Tank designed and built to withstand high pressures
• Exterior material: steel sheeting and / or plastic
• Easy handling
• Insulating material: polyurethane without CFC
• Anticorrosion protection: magnesium anode.
2.3

Anticorrosion protection

The inside of the tank is lined with homogeneous glass enamel,
completely neutral with regards to compatibility and contact
with potable water. This lining is neutral with regard to the use
with potable water. The existence of a magnesium anode
provides additional anticorrosion protection.
Tronic 2000T – 6 720 885 113 (2021/08)
Unit
ppm 120
grain/US gallon 7.2
°dH 6.7
6.5 – 9.5
μS/cm 130 – 1500

Technical Characteristics and dimensions

2.4 Accessories (included in the appliance
packaging)
1
3
Fig. 1
1)
[1] Hook (2x)
1)
[2] Sleeve (2x)
[3] Safety valve (8 bar)
[4] Galvanic insulator (2x)
1) available in some models (depending on the market)
6720801526-01.2V
1)
2
4
5