Installation - Bosch Therm 6000 S Installation And Operating Instructions Manual

16 | Installation instructions
Fix the xing bracket to the wall using the screws and plugs
provided.
Fig. 22 Fix the xing bracket

5.5 Installation

CAUTION: Possibility of damage caused by
foreign bodies!
Purge all tubes to eliminate possible
foreign bodies.
Remove appliance from packaging.
Ensure that all indica ted parts are included.
Remove the plastic caps from the gas and water
connections.
6 720 800 095 (2014/05)
Loosen the two Philips head screws located on bottom rear
Fig. 23 Loosen the two screws
6720608913-05.1AL
Fig. 24
Fix the appliance in a vertical position.
Lift front cover pane l upward and remove.
of cover (Fig. 23).
CAUTION:
Never rest the heater on the gas or water
connections.
Therm 6000S