Before Operating The Appliance; Connect And Disconnect The Appliance; Water Temperature Setting; Operation - Bosch Therm 6000 S Installation And Operating Instructions Manual

4.2

Before operating the appliance

CAUTION:
▶ The initial startup of the heater must be
realized by a qualified technician, who
will provide the client with all the
information necessary for its correct
usage.
▶ Confirm that the gas type of the heater matches the gas
supply you will be connecting the heater.
▶ Open gas valve.
Check for gas leaks at all joints.
▶ Open water valve.
Check for water leaks at all joints.
4.3

Connect and disconnect the appliance

Connect
▶ To start the appliance press the On/Off button.
Fig. 12
Disconnect
▶ To shut down the appliance press the On/Off button again.
4.4

Water temperature setting

The temperature value indicated on the
LCD panel corresponds to the water
temperature at the appliance outlet.
To regulate the emitted water temperature:
Therm 6000S
+
▶ Press the or
obtained.
Fig. 13
▶ Once the desired temperature is set, open the hot water
tap.
These appliance has an electronically
controlled gas valve that modulates the
burner input in response to both varying hot
water flow rates and/or changes in any
incoming and outgoing water
temperatures.
4.5

Operation

Turn ON the main switch and the appliance is ready to work.
▶ When a hot water tap is opened, main burner ignites and
LCD displays indication
Fig. 14
LCD flashes until selected temperature is
reached.
Operating instructions | 11
until the desired value is
.
6720608920-35.1AL
6 720 800 095 (2015/11)