Program Button; Priority" Function; Purge The Appliance - Bosch Therm 6000 S Installation And Operating Instructions Manual

Table of Contents

Advertisement

4.8 Program button

Program button can be used/programmed in the appliance and
in the remote control.
Programming "Program" function
Each remote control program button can
be programmed with di erent temperature
values according with the user needs. A
temperature value can be programmed in
the remote control and another value in the
appliance.
Fig. 17 "Program" key
Press buttons
and
be memorized.
Press "Program" button for 3 seconds to save temperature.
The temperature is saved on "Program" when the LCD panel
stops blinking.
Using "Program" function
In order to select memorized temperature:
Press "Program" key.
LCD shows pre-memorized temperature, which is now the
selected hot water temperature.

4.9 "Priority" function

PRIORITY is a function to prevents the user
from accidentally altering the water
temperature selected by another user.
Therm 6000S
Program
6720608920-32. 1 AL
to select temperature to
The appliance does not have a designated default priority.
Priority is attributed when the rst user selects a temperature
(see chapter 4.4).
The following symbol appears for other users
The priority user may change the initial selection at any time.
Non-priority users cannot change
priority user.
The system resets priority function 5 minutes after last water
demand, returning to the initial state.
To select priority
Any user may select temperatur
following manner:
Press one of the selection keys
5 seconds.
Priority cannot be selected when the
appliance is working.

4.10 Purge the appliance

If there is a risk of freezing, proceed as follows:
Close the cold water valve of the water heater.
Open hot water taps to drain the water heater.
Remove all the water contained inside of the appliance.
CAUTION:
The non accomplishment of the purgative
of the appliance whenever the freezing
risk exists, it can damage components of
the appliance.
If the appliance is inst alled in places where
freezing risk exists the accessory anti-
freezing should be used, cod. 7 709 003
709.
Operating instructions | 13
the selection made by the
e selection priority in the
or
for
6 720 800 095 (2014/05)
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents