Multifunction Switch - Can-Am ds 450 series Operator's Manual

NOTICE
Parking brake position
can vary depending on brake pads
wear. Ensure when the parking
brake is applied that the vehicle
stays securely in place.
To release mechanism: Squeeze
front brake lever. Lever lock should
automatically return to its original posi-
tion. Front brake lever should return to
rest position. Always release parking
brake before riding.

5) Multifunction Switch

The multifunction switch is located on
the LH side of the handlebar.
The controls located on this multifunc-
tion switch housing are:
vmo2008-011-007_a
1. Headlights switch
2. Emergency engine stop switch
3. Engine start button
CONTROLS/INSTRUMENT/EQUIPMENTS
Headlights Switch
vmo2008-011-008_a
HEADLIGHTS SWITCH FUNCTIONS
1. Headlights switch
2. Low beam
3. High beam
NOTE: Place ignition switch to ON
"without headlights" position to turn
off the headlights.
vmo2008-011-027_a
IGNITION SWITCH POSITIONS
1. OFF
2. ON "with light"
3. ON "without light"
Emergency Engine Stop Switch
This switch is used to stop the engine
and as an emergency control.
To stop engine, fully release throttle
lever then use the emergency engine
stop switch.
NOTE: While engine can be stopped
by turning ignition key OFF, we recom-
mend the engine be stopped by the
emergency engine stop switch.
_______________
59