Handlebar Switch (Right); Carburetor Switch - Yamaha SRX700D Service Manual

Hide thumbs Also See for SRX700D:
Table of Contents

Advertisement

Ω × 1
+
Ω × 1
+
SDN8160
Ω × 1
B
SDN8130
B/Y B/W
B
SDN8140
B/Y B/W
B
SDN8150
+
B/Y
SDN8170
IGNITION SYSTEM

HANDLEBAR SWITCH (RIGHT)

Engine stop switch and throttle switch
1. Disconnect:
Handlebar switch (right) coupler
2. Connect:
Pocket tester
3. Check:
Engine stop switch continuity
Faulty → Replace the handlebar switch
(right).
Switch position
RUN (pulled out)
OFF (pushed in)
4. Check:
Throttle switch continuity
Faulty → Replace the handlebar switch
(right).
Throttle switch
position
Throttle lever is
operated.
Throttle lever is not
operated.

CARBURETOR SWITCH

1. Disconnect:
Carburetor switch lead
2. Connect:
Pocket tester
3. Check:
Carburetor switch continuity
Faulty → Replace.
Carburetor switch
position
Throttle lever is
operated.
Throttle lever is not
operated.
8-6
+
ELEC
Continuity
Yes
No
Continuity
Yes
No
Continuity
No
Yes

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx700sd

Table of Contents