SDN2060
1
2
2
OIL PUMP/FUEL LINE INSPECTION
13. Install:
14. Install:
Cable adjustment
NOTE:
Before adjusting the oil pump cable, the throttle
cable distance should be adjusted.
Adjustment steps:
•
•
•
Turning in → Distance a is increased.
Turning out → Distance a is decreased.
•
SDN2070
FUEL LINE INSPECTION
1. Remove:
2. Inspect:
3. Install:
SDN2080
SDN2090
2-5
•
Gasket (bleed screw)
•
Bleed screw
•
Carburetors
Refer to "CARBURETORS" in CHAPTER 7.
Slide back the adjuster cover.
Loosen the locknut 1.
Turn the adjuster 2 in or out until the speci-
fied distance is obtained.
Distance a:
20 ~ 22 mm (0.79 ~ 0.86 in)
Tighten the locknut and push in the adjuster
cover.
•
Intake silencer
Refer to "FUEL PUMP" in CHAPTER 7.
•
Fuel hose 1
•
Fuel delivery hoses 2
Cracks/damage → Replace.
•
Intake silencer
Refer to "FUEL PUMP" in CHAPTER 7.
INSP
ADJ