Important Information; Preparation For Removal And Disassembly; All Replacement Parts - Yamaha SRX700D Service Manual

IMPORTANT INFORMATION

IMPORTANT INFORMATION

PREPARATION FOR REMOVAL AND DISASSEMBLY

1. Remove all dirt, mud, dust, and foreign material before removal and
disassembly.
While cleaning, take care to protect the electrical parts, such as
relays, switches, motor, resistors, controllers, etc., from high pres-
sure water splashes.
SDN1030
2. Use proper tools and cleaning equipment.
Refer to "SPECIAL TOOLS".
SDN1040
3. When disassembling the machine, keep mated parts together. This
includes gears, cylinders, pistons, and other parts that have been
"mated" through normal wear. Mated parts must be reused or
replaced as an assembly.
SDN1050
4. During disassembly of the machine, clean all parts and place them
in trays in the order of disassembly. This will speed up assembly
time and help ensure that all parts are reinstalled correctly.
SDN1060
5. Keep all parts away from any source of fire.
6. Be sure to keep to the tightening torque specifications. When
tightening bolts, nuts, and screws, start with those that have larger
diameters, and proceed from the inside to the outside in a crisscross
pattern.
SDN1070

ALL REPLACEMENT PARTS

We recommend using genuine Yamaha parts for all replacements. Use
oil and grease recommended by Yamaha for assembly and adjust-
ments.
SDN1080
1-2
GEN
INFO