Installation - Yamaha SRX700D Service Manual

YAMAHA POWER VALVE SYSTEM (Y.P.V.S.)
b
2 3
1
4
1
SDN5760
3. Install:
•
Valve housing 1
a
NOTE:
Align the projection a on valve housing 1 with
the projection b on valve housing 2.
SDN5720
4. Install:
•
Y.P.V.S. cables
Refer to the illustrations.
SDN5730
NOTE:
•
Before installing the Y.P.V.S. cable onto the
Y.P.V.S. cable pulley, check that the Y.P.V.S.
cable moves smoothly.
•
After installing the cables, turn the Y.P.V.S.
cable pulley 4 counterclockwise to remove any
freeplay.
SDN5740

INSTALLATION

NOTE:
After installing all parts, refer to "CABLE ROUT-
ING" in CHAPTER 9, to check the cable, lead and
hose routings.
1. Install:
•
Cable holder 1
SDN5750
NOTE:
•
Make sure that the cables are properly posi-
tioned in the holder as shown.
•
The opened-side of the cable holder should
face in.
•
Position the cable holder as close to the spark
plug as possible.
2 #1 Cable
3 #2 Cable
4 #3 Cable
5-33
ENG
Cable Installation Position
#1 Lower notch 1
Cable
#2 Cable Upper notch 2
#3 Cable Center notch 3