Yamaha SRX700D Service Manual page 228

1 Oil pump cable
2 Throttle cable
3 Do not fasten the throttle cable
and oil pump cable.
4 Thumb warmer coupler
5 Engine stop switch coupler
6 Pass the throttle cable and oil
pump cable through the
holder.
7 Grip warmer connector
8 Brake light switch coupler
9 Headlight beam switch
; Fasten the brake light switch
lead, headlight beam switch
lead and grip warmer lead with
a plastic band.
A Parking brake cable
B Oil tank breather hose
C Fasten the oil tank breather
hose with a plastic band.
D Fasten the left and right
handlebar switches, and the oil
tank breather hose behind the
steering column, with a plastic
band. Do not fasten the parking
brake cable and brake hose.
E Fasten the wire harness and
fuel tank breather hose with a
plastic band.
F Condenser coupler
G Ground lead
H Fuel tank breather hose
I Fuel sender coupler
J Oil level switch coupler
K YAMAHA POWER VALVE
SYSTEM (Y.P.V.S.) coupler and
connector
L YAMAHA POWER VALVE
SYSTEM (Y.P.V.S.) check
coupler.
M Fasten the fuel tank breather
hose, voltage regulator lead,
CDI unit lead and YAMAHA
POWER VALVE SYSTEM
(Y.P.V.S.) lead with a plastic
band.
CABLE ROUTING
9-28
SPEC