SHEAVE DISTANCE AND OFFSET ADJUSTMENT
1
1
1
a
7. Adjust:
•
Adjustment steps:
•
Loosen the engine mounting bolts.
•
Adjust the position of the engine so that the
sheave distance is within the specification.
•
Tighten the engine mounting bolts.
SDN2340
SDN2350
1
8. Measure:
•
SDN2370
9. Adjust:
•
3
Adjustment steps:
•
Apply the brake to lock the secondary sheave.
•
Remove the bolt 1 and washer 2.
2
•
Adjust the secondary sheave freeplay (clear-
1
ance) by adding or removing a shim(s) 3.
Shim size:
SDN2380
10. Install:
•
11. Install:
•
2-19
INSP
ADJ
Sheave distance
Mounting bolt 1:
50 Nm (5.0 m • kg, 36 ft • lb)
Secondary sheave freeplay (clearance) a
Use a feeler gauge.
Out of specification → Adjust.
Secondary sheave freeplay
(clearance) a:
1.0 ~ 2.0 mm (0.04 ~ 0.08 in)
Secondary sheave freeplay (clearance)
Part number
90201-222F0
0.5 mm (0.02 in)
90201-225A4
1.0 mm (0.04 in)
Carburetors
Refer to "CARBURETORS" in CHAPTER 7.
Exhaust pipe #1 (L), #2, #3 (R)
Refer to "EXHAUST ASSEMBLY" in CHAP-
TER 5.
Thickness