Components List; Installation Overview; Placement Clearance Requirements - kozy heat DASSEL DSL-36 Installation And Operation Manual

#DSL-36 COMPONENTS LIST
PART NUMBER
DSL-770 Millivolt Board Assembly
700-203 Manual Gas Shut-off Valve
DSL-135 Burner / Log Grate Assembly
DSL-500 Log Package
DSL-057T Glass Frame Assembly
OCK-S53A LP Conversion Kit
600-083 Receptacle/Speed Control Assembly
942085 5" Restrictor Plate
DSL-HHS Horizontal Vent Heat Shield
500-DSL 3 pc. Grill Assembly

INSTALLATION OVERVIEW

NOTE: The qualified installer should follow the procedure best suited for the installation.
1. Frame an opening for fireplace, allowing for vent installation and type of installation (corner or flat wall application).
2. If masonry (optional) is used, prepare foundation for the masonry load. A lintel is required to support the added weight above fireplace.
3. Attach stand-off brackets and nailing flanges to fireplace.
4. Insert fireplace into framing.
5. Install hearth (if applicable).
6. Complete gas line installation.
7. Complete electrical hook-up. Install any standard or optional electrical components at this time.
8. Complete venting installation.
9. Secure fireplace to flooring through holes in outer box bottom and to framing with nailing flanges. Verify all clearances at this point.
10. Install facing material, mantel or cabinetry, allowing room for optional full face doors, if applicable.
11. Install optional refractory.
12. Install logs.
13. Install grills and optional decorative doors / faces.
14. Verify proper operation of fireplace and all components.

PLACEMENT CLEARANCE REQUIREMENTS

This fireplace must be installed on a level surface capable of supporting fireplace and venting.
Fireplace must be placed directly on wood or non-combustible surface (not linoleum or carpet) extending entire depth and width of fireplace.
Due to high surface temperatures, fireplace should be located out of traffic and away from furniture and draperies.
This fireplace may be installed in a bedroom.
Please be aware of the large amount of heat this fireplace will produce when determining a location.
SPECIFICATIONS
DESCRIPTION
PAGE 7
#DSL-36-IPI COMPONENTS LIST
PART NUMBER
DSL-600-IPI Control Board Assembly
700-203 Manual Gas Shut-off Valve
DSL-135 Burner / Log Grate Assembly
IPI-028 IPI Fan Kit
DSL-500 Log Package
DSL-057T Glass Frame Assembly
OCK-A53L-IPI LP Conversion Kit
700-208 Remote Control
600-002 Double Receptacle Assembly
942085 5" Restrictor Plate
DSL-HHS Horizontal Vent Heat Shield
500-DSL 3 pc. Grill Assembly
DESCRIPTION