Fig. 12 Bilge D/C Panel And Battery Selector Switches; Fig. 13 Helm D/C Terminal Bus Panel - Pro-Line Boats 2000 30 Sport Owner's Manual

20
Direct Current
12 volt direct current provides electrical power for all lighting, pumps, electronics, and
D/C devices. A main breaker panel is located in the bilge on the port stringer. There is
also a D/C terminal bus panel located behind the helm inside of the console. Battery
selector switches are for battery isolation, parallel operation, and disconnect. Caution:
To avoid possible alternator / battery damage on twin engine installations, insure the dual
battery switches are never left so both engines are connected together (never leave a
switch on "BOTH" or "ALL"). The preferred switch position is port engine to port
battery, starboard to starboard. Models with a generator installed will have an additional
battery switch for the generator electrical system.
Bilge D/C Panel and Battery Selector Switches ^
<fig. 12 and 13 – D/C Panels>
Helm D/C Terminal Bus Panel ^