After Market Accessories; Fig. 11 Bilge D/C Panel And Battery Selector Switches; Fig. 12 Helm D/C Terminal Bus Panel - Pro-Line Boats 27 Walk Owner's Manual

20
Bilge D/C Panel and Battery Selector Switches ^
Helm D/C Terminal Bus Panel ^
<fig. 11 and 12 – D/C Panels>

After Market Accessories

Your Pro-Line's electrical system was designed for factory tested and approved dealer
installed optional accessories. Pro-Line makes no recommendations to the suitability of
accessories that are not listed in the Pro-Line sales literature. Any unapproved
modifications or additions to the standard or optional system are done at the owner's risk
and may void the warranty. Unapproved modifications could result in risk of fire or
failure of the electrical system. A pull wire is installed in the optional hard top to
facilitate installation of electronics. The wire is located on the starboard side, forward
corner of the overhead electronics box. Use the factory supplied buss bar for connection.
Make sure any added circuits are protected by a fuse or breaker and the wire is properly
sized for the load and length of run.