Download  Print this page

Setting The Ringer Frequency; Activating/Deactivating The Mute Melody; Baby Call (Direct Call) Number Setting; Activate/Deactivate Call Duration Display - Siemens Euroset 5020 Quick Manual

Hide thumbs

Advertisement

Table of Contents
euroset 5020 / SAR arab-eng-fra / A30350-M209-H301-2-3T19 / 5020.fm / 03.08.2006
H
I
Press
...
before lifting the handset.
The last value set is saved.

Setting the ringer frequency

The frequency (speed) of the ringer can be set to one of
three levels (default setting: level 3).
?6
Initiate function.
1
3
...
Press one of the keys 1...3:
1: highest frequency; 3: lowest frequency.
?
Press the Set key.
Setting the ringtone
Ten different ringtones can be set for the ringer (default
setting: ringtone 9).
To set with the telephone is idle:
?7
Initiate function.
0
9
...
Press one of the keys 0 ... 9
?
Press the Set key.
To set while the telephone is ringing:
0
...
9
Press one of the keys 0 to 9.
Setting the handset volume
The volume on the handset can be set to one of 3 levels and
saved (default setting: level 1).
?9
Initiate function.
H
I
...
Adjust the volume with the Loud/Quiet key.
?
Press the Set key.
Mute
You can deactivate the telephone's handset and
microphone. Then the other party can no longer hear you.
J
During a call: Press the Mute key
Activate: Press the key again.
Adjusting the loudspeaker
While in handsfree mode, you can set the volume to one of
7 levels and save it (default setting: 1).
H
...
I
Adjust the volume with the Loud/Quiet key.

Activating/deactivating the mute melody

You can activate and deactivate the mute melody for the
mute (default setting: on).
?19 #
Initiate function.
0
/
1
0: deactivate; 1: activate.
?
Press the Set key.
4
GB

Baby call (direct call) number setting

If a phone number is set for the Baby Call function, it is
dialled automatically when the telephone is locked
(s. "Activating/deactivating the telephone lock") after you
lift the handset (or press the Loudspeaker key) and press
?
L
any key (except
,
does not allow other phone numbers to be dialled, but
incoming calls can be received.
?82
Initiate function.
o
Enter direct call number (max. 32 digits).
?
Press the Set key.
When the baby call function is activated, you will see
{
and
in the display.
Deactivating
?80
Initiate function.
?
Press the Set key.
Deleting a baby call phone number
?1253
Initiate function.
?
Press the Set key.
Activating/deactivating the telephone lock
The telephone can be locked completely (with the exception
of a baby call phone number if set) so that it cannot dial any
phone numbers, including the baby call phone number. You
can continue to receive incoming calls.
?8
Initiate function..
0
1
/
0: unlock; 1: lock
?
Press the Set key.
When the telephone is locked, you will see
display.

Activate/deactivate call duration display

The telephone can display the approximate call duration in
the display (up to 99 min. 59 sec., default setting: on). If the
call duration display is activated, the time display begins
8 seconds after the last digit is dialled.
?18#
Initiate function.
0
/
1
0: deactivate; 1: activate.
?
Press the Set key.
H
I
,
and
). The telephone
è
{
in the

Hide quick links:

Advertisement

Table of Contents
loading