Modem Ce Mark Emc And Safety Compliance; Australian And New Zealand Modem Warning Notice; Australian Modem Warning Notice - Multitech MultiModem MT3334ZDX Owner's Manual

MT3334ZDX/V Owner's Manual

Modem CE Mark EMC and Safety Compliance

The CE mark is affixed to the enclosed Multi-Tech product to confirm
compliance with the following European Community Directives:
Council Directive 89/336/EEC of 3 May 1989 on the approximation of laws
of Member States relating to electromagnetic compatibility;
and
Council Directive 73/23/EEC of 19 February 1973 on the harmonization
of the laws of Member States relating to electrical equipment designed for
use within certain voltage limits;
both amended by
Council Directive 93/68/EEC of 22 July 1993 on the harmonization of CE
marking requirements.

Australian and New Zealand Modem Warning Notice

Australian Modem Warning Notice

Modems connected to the Australian telecommunications network must
have a valid AUSTEL permit. This modem has been specifically configured
to ensure compliance with AUSTEL Standards. The following commands
can affect compliance and must not be set outside the acceptable range.
Modem Commands:
Command
A:
ATB
AT&G
AT&P
ATSn
S-Register
S6
64
Default
-
B0
&G2
&P1
see table below
Default
4
Permissible Range
Do not use
Do not change
Do not change
Do not change
Permissible Range
2 - 5