Multitech MultiModem MT3334ZDX Owner's Manual page 34

MT3334ZDX/V Owner's Manual
Command: \K n
Values:
Default:
Description: \K5
Command: \N n
Values:
Default:
Description: \N0
Command: \V n
Values:
Default:
Description: \V0
Command: %C n
Values:
Default:
Description: %C0
Command: $D
Values:
Default:
Description: $D0
34
Set Break Control
n = 5
5
Modem sends break signal received from the DTE
to the remote modem.
Error Correction Mode Selection
n = 0–5
3
Non-error correction mode with data buffering
(same as &Q6 ).
\N1 Direct mode.
\N2 MNP reliable mode.
\N3 V.42/MNP auto-reliable mode.
\N4 V.42 reliable mode.
V.42, MNP, or non-error correction (same as \N3 ).
\N5
Protocol Result Code
n = 0 or 1
1
Disable protocol Result Code appended to DCE
speed.
\V1 Enable protocol Result Code appended to DCE
speed.
Data Compression Control
n = 0 or 1
1
Disable V.42bis/MNP 5 data compression.
%C1 Enable V.42bis/MNP 5 data compression.
DTR Dialing
n = 0 or 1
0
Disables DTR Dialing.
$D1 Enables DTR Dialing.