Table of Contents
Advertisement
Command: &Q n
Values:
n = 0, 5, or 6
Defaults:
5
Description: &Q0
&Q5
&Q6
Command: &S n
n = 0 or 1
Values:
Default:
0
Description: &S0
&S1
Command: &T n
Values:
n = 0, 1, 3 or 6
Default:
None
Description: &T0
&T1
&T3
&T6
Command: &V
Values:
n/a
Description:
Command: &W n
Values:
n = 0
Default:
None
Description: &W0
Command: &Y n
Values:
n = 0
Default:
0
Description: &Y0
Command: &Z n = x Store Telephone Number
Values:
n = 0, 1, 2 or 3
x = Dialing string
Default:
None
Description:
3 - AT Commands, S-Registers and Result Codes
Asynchronous Communications Mode
Asynchronous with data buffering. Same as \N0 .
Error control with data buffering. Same as \N3 .
Asynchronous with data buffering. Same as \N0 .
Data Set Ready (DSR) Control
Force DSR high (on).
Let DSR follow CD.
Test Commands
Abort. Stop any test in progress.
Local analog loop test.
Local digital loopback test.
Remote digital loopback test.
View Current Configuration
Displays the active modem settings.
Store Current Configuration
Store active modem settings in NVRAM; load them
at power-on or following the ATZ command instead
of loading the factory defaults from ROM.
Select Stored Configuration for Hard Reset
Select stored configuration 0 on power-up. (For
backward compatibility with some software.)
Stores telephone dial string x in memory location
n . Dial the stored number using the command
ATDS=n .
33
Advertisement
Table of Contents
