Multitech MultiModem MT3334ZDX Owner's Manual page 30

MT3334ZDX/V Owner's Manual
Command: N n
Values:
Default:
Description: N0
Command: O n
Values:
Default:
Description: O0
Command: Q n
Values:
Default:
Description: Q0
Command: S r = n
Values:
Default:
Description:
Command: S r ?
Values:
Default:
Description:
Command: V n
Values:
Default:
Description: V0
30
Modulation Handshake
n = 0 or 1
1
Modem
communication standard specified by S37 and the
B command.
N1 Modem begins handshake at communication
standard specified by S37 and the B command.
During handshake, fallback to a lower speed can
occur.
Return Online to Data Mode
0 or 1
None
Exit online command mode and return to data
mode (see +++AT<CR>
command).
O1 Issue a retrain and return to online data mode.
Enable/Disable Result Codes
n = 0 or 1
0
Enable Result Codes.
Q1 Disable Result Codes.
Set Register Value
r = S-register number; n varies
None
Set value of register S r to value of n , where n is
entered in decimal format.
Read Register Value
r = S-register number
None
Read value of register S r and display value in 3-
digit decimal form.
Terse/Verbose Result Code Format
n = 0 or 1
1
Displays Result Codes as digits (terse response).
V1 Displays Result Codes as words (verbose
response).
performs handshake only
Escape Sequence
at