Overview of Pan / Tilt / Zoom/Synchronization Options Screen
When Pan/Tilt/Zoom/Sync Opts is selected from the Dome Configuration Menu, the
following screen appears:
Use this screen to enable or disable the "automatic flip" feature, configure the zoom stop
settings, and set the line lock options.
•
To change the settings, move the highlight bar to appropriate field and make the changes.
•
To change the settings for this screen to the factory defaults, select Reset to Factory
Settings.
•
To return to the Dome Configuration Menu, select Exit.
2-2
PAN/TILT/ZOOM/SYNC OPTS
PROPORTIONAL FLIP
1ST ZOOM STOP X
MAX TOTAL ZOOM X
LINE LOCK
FREEZE FRAME
RESET TO FACTORY SETTINGS
EXIT
OFF/ON
33/22
44...242
ON/OFF
OFF/ON
SpeedDome Ultra VII Operator's Manual