American Dynamics SpeedDome Ultra VII Operator's Manual page 81

Supported Controllers
The following SensorNet and RS-422 controllers are compatible with SpeedDome Ultra VII:
Controller
VM8 SensorNet
VM16/VM16+/ SensorNet
ADTT16/ADTT16E
VM32/VM32E/ SensorNet
AD32/AD32E
2
VM96 SensorNet or
RS-422
Touch Tracker 16 SensorNet
Elite (VCTT16E)
VM1 RS-422
AD2083-02A RS-422
AD2083-02B
SensorNet to RS-422 RS-422
6
Converter
AD168/MP168 SensorNet
RS-422
AD48 SensorNet
RS-422
This list of controllers is complete as of the time of publication. Other controllers may be supported. Contact
your Sales Representative for current information.
1
Only the default Apple Peel pattern is available.
2
Requires VM96 version 5.2 or newer. VM96 uses "virtual views." Preset information is stored by the host, not the
dome.
3
Additional equipment is required to achieve these numbers.
4
Preset information is stored by code translator, not the dome.
5
A dome address within each group of 64 or 99 cameras is reserved as a global broadcast address.
6
SensorNet to RS-422 Converter allows SensorNet controllers (VM16/VM32 or equivalent) to operate RS-422 domes.
SensorNet and RS-422 Command Summary
Protocol Presets
None
96
96
Unlimited
96
4
4
16
4
96
96
Patterns Address Range
1
None 1-8
3 1-16
3 1-32
3 1-96
3 1-224
3 1-58
3 1024 Max.
Controller dependent.
3 32 Max.
Controller dependent.
3 1-168 (SensorNet)
1-99 (RS-422)
3 1-48
3
3
3, 5
3
A-3