Displaying Or Hiding Status Information - American Dynamics SpeedDome Ultra VII Operator's Manual

Displaying or Hiding Status Information

You can choose to display the status of the zoom setting, auto focus, and auto iris. This
information will appear in the upper left corner of the monitor. The information only appears
when there is a change in the status of any item and remains on the screen for 5 seconds. If
"D" appears next to the zoom factor, the digital zoom is active (zooms greater than 22X).
Figure 5-1: Example of Zoom, Auto Focus and Auto Iris Status Information
Note: Displaying status information is separate from displaying name information. If the
Disable All Names? setting is set to Yes, the status information still appears if Status
Display is set to On.
Changing the Display of Status Information
1. Select On-Screen Text Display from the Dome Configuration Menu.
The highlight bar appears on Status Display.
2. Change the setting.
• Select On to display dome status information on the monitor.
•
Select Off to prevent dome status information from appearing on the monitor.
The default setting is Off.
3. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next
on page 5-14.
Configuring Text Displayed On-Screen
ZOOM X 92 D
AUTO IRIS OFF
AUTO FOCUS ON
5-3