Procedure 3-4 Controlling Dome Pan/Tilt Via A Mouse Using - American Dynamics IP SpeedDome Ultra 8 Configuration And User's Manual

Web Configuration
Iris
Zoom
Focus
Pan/Tilt Movement
Controlling the Pan/Tilt Control via Mouse
Procedure 3-4 Controlling dome Pan/Tilt via a mouse using the Live Video page
1 Select
2 Float the cursor over the center of the video pane. The Cursor Origin Mark
3 Click and drag the cursor to set the direction and speed, then release.
• The camera's movement speed increases proportionally with the arrow's distance from the
cursor origin mark.
• The camera's direction is relative to cursor origin mark.
Note
Varied speed relative to distance from the cursor origin mark is only available if it is supported
by the camera and implemented in the PTZ protocol.
3-8
in the camera's pane.
Open
Auto Iris and Focus (on cameras which support
this feature)
Close
In
Out
Near
Far
Pan/Tilt (outer rim)
appears.
Configuration and User Guide