Assigning Or Changing Name Information - American Dynamics SpeedDome Ultra VII Operator's Manual

Assigning or Changing Name Information

With the Name Configuration Menu displayed, you can select a menu item to begin name
programming.
Names for each selection can be up to 19 characters long. The following characters are
available:
•
A-Z (upper case)
•
Blank Space
Setting or Changing Names
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Select Name Configuration Menu.
The Name Configuration Menu appears.
3. Select the name setting you want to change. The choices are Camera Name, Area
Name, Preset Name, Pattern Name, and Alarm Name.
•
If you choose Camera Name, continue with step 6.
• If you choose Area Name, Preset Name, Pattern Name, or Alarm Name, continue
with step 4.
4. The Select Name to Program screen appears.
5-10
•
a-z (lower case)
•
Minus Sign (-)
SELECT NAME TO PROGRAM
PRESET /PATTERN/AREA/ALARM
NUMBER
1-96
1-3
1-16
1-4
FOCUS FAR to program names
Note: Gray text refers to other options that may appear on-screen.
•
0-9
•
Forward Slash (/)
CURRENT NAME
Preset 1-96
Pattern 1-3
Area 1-16
Alarm 1-4
EXIT
SpeedDome Ultra VII Operator's Manual