Restoring Factory Settings; Exiting The Configuration Utility - American Dynamics SpeedDome Ultra VII Operator's Manual

Restoring Factory Settings

Some screens provide a choice to restore factory settings. This choice applies only to those settings
currently displayed on the screen. To reset all configuration settings, choose Reset to Factory
Settings from the Dome Configuration Menu. The following prompt appears:
Press Zoom to display the options.
• If you want to restore the factory settings, select Yes.
• If you do not want to restore the factory settings, select No.
Press Focus to accept the displayed option.
I M P O R T A N T
Selecting Reset to Factory Settings from the Dome Configuration Menu does not change the
following settings: Camera Name, Alarm Names, Area Names, Preset Names, Pattern Names, Area
Boundaries, Privacy Zones, and Presets. To reset names to the default settings, see Chapter 5:
Configuring Text Displayed On-Screen.

Exiting the Configuration Utility

Under SensorNet, RS-422, and Manchester protocols, you may save your changes and exit the utility
from any screen by pressing and holding Iris Close, then pressing Focus. From the Dome
Configuration Menu, you have two choices for exiting the utility: Exit and Save Changes or Quit
Without Saving. Use the Pan/Tilt control to move the highlight bar up and down on the screen.
• If you want to keep the changes you made, move the highlight bar to Exit and Save Changes,
and select. The utility closes.
• If you want to exit without making changes, move the highlight bar to Quit Without Saving, and
select. The following prompt appears on the screen:
Press Zoom to display the options.
• To cancel the changes, select Yes.
• To keep the changes, select No. If you choose No, the Dome Configuration Menu is displayed.
Press Focus to accept the displayed option.
I M P O R T A N T
The following settings do not restore when selecting Quit Without Saving from the Dome
Configuration Menu: Area Boundaries and AGC/Shutter Limit.
Using the Dome Configuration Utility
Reset to Factory Settings
No
Data Not Saved. Quit Anyway?
No
1-5