Barco R9002370 Owner's Manual page 53

I2C Diagnostics
Highlights 'I2C Diagnostics' by pushing the control arrow up or down and press
ENTER.
The I2C diagnositics menu gives an overview of the I2C failures inside the
projector.
To scroll through the failure list, push the control arrow up or down.
The I2C address, IC number and module name will be given in I2C diagnostic
menu.
When no errors are detected, the following message will appear on the screen
:
"No errors on I2C-bus detected".
R5975809 BARCO CINE 6 ___________________________________________________________________________________
Service Mode
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
or
Select with
then <ENTER>
<EXIT> to return
I2C DIAGNOSTICS
Failure :
addr IC number mod. name
48H IC200 DECODER
or
Select with
then <ENTER>
<EXIT> to return
7-15