Table of Contents
Advertisement
Options
RCVDS 05
An optional RCVDS 05 source selector makes it possible to connect up to 20 sources to the projector.
When RCVDS's are linked via the expansion module, even 90 inputs can be connected to the projector.
The selected source number will be displayed on a 2 digit display and the selected input module will be indicated with a LED on
the rear.
VS05
The VS05 is a versatile
It offers the possibility to connect and switch up to 5 different Video sources, 3 different S-Video sources and 1 RGB
Analog source to a BARCO projector. In addition, the audio signal proper to the source, can be switched to an audio amplifier.
Adapter and communication cables
BARCO provides several cables to connect peripheral equipment to the projector.
a. D9-D9
communication cable
- To connect an IBM PC (or compatible) to the projector. (only if the optional
- To connect an RCVDS to the projector.
- To connect an IR receiver to the RCVDS05 or to the projector.
- To be used as extension cable for all other adapter cables.
Available length : 5m (16ft), order number
15m (50ft), order number R9827560;
and 30m (100ft), order number R9827570
b. Din
Mini 8-D9 adapter cable.
- To connect a Macintosh computer to the projector.
Available length : 1 m, order number R9827640.
c. D25-D9
adapter cable
- To connect a workstation to the projector.
Available length : 1 m, order number R9827630
Ceiling mount CM50
This suspension system enables to mount any projector from the BARCO 700 series to the ceiling without using any mechanical
interface, and to adapt the projector perfectly to the local mounting requirements.
Order number CM50 with pulley
Order
number
CM50 without pulley : R9827991
8 - 2 ___________________________________________________________________________________ R5975809 BARCO CINE 6
Video and HDTV source selector for all BARCO's digitally controlled large screen projectors.
R982770;
: R9827990
RS232 port is installed.)
Advertisement
Table of Contents
