Crt Drive Mode; Memory Bank - Barco R9002370 Owner's Manual

Service Mode
Projector Warm Up
Highlight 'Projector Warm Up' with the control arrow and press ENTER
to continue.
Turning the highlighted option to ON position will enable the projector
to warm up with a white pattern for 20 minutes at power up.
Turning the option to OFF positon with disable this option.

CRT Drive Mode

Highlight 'CRT Drive Mode' with the control arrow and press ENTER
to continue.
CRT Drive Mode of Normal, Economic, Temporary Boost or Permanent
Boost can be selected with arrow keys. Press ENTER to select mode.
Permanent Boost gives the Brightest Image but a reduced life for CRT.

Memory Bank

Toggle to ON or OFF
7 - 1 0 ___________________________________________________________________________________ R5975809 BARCO CINE 6
PROJECTOR WARM UP
OPTION : OFF
AFULL WHITE PATTERN WILL BE
GENERATED FOR 20 MINUTES
AT POWERUP.
AFTER THIS PROCEDURE THE
PROJECTOR IS READY TO
PERFORM IN OPTIMUM
CONDITION.
TOGGLE OPTION ON OR OFF
WITH <ENTER>
<EXIT> TO RETURN
CRT DRIVE MODE
NORMAL
ECONOMIC
TEMPORARY BOOST
PERMANENT BOOST
WARNING : PERMANENT BOOST
MODE REDUCE THE LIFELINE OF
THE CRT'S !
or
Select with
then <ENTER>
<EXIT> to return